Login to the D&D KM-IT.

Not a registered user? click here for U.S. registration or here for international registration.      Forgot your password? Click here

User name:   Password:   Close

Search the D&D KM-IT

Welcome Guest
Try our mobile friendly tool.

Share page:  

printer friendly logo

Technology Factsheet

LTC Power Tool Center

Category: Decontamination > Mechanical Surface Removal > Scabbling , Mechanical
Reference # : Model No : LTC-PTC 6

The LTC Power Tool Center (PTC) is capable of supporting up to six vacuum shrouded mechanical type removal tools (needle gun, grinder, roto-peen, planer, scabbler, and/or scalers) simultaneously for the safe containment of the waste generated in the removal of hazardous coatings and contaminants from solid surfaces. The PTC is equipped with a primary waste filter for removal of waste particulate from the air to be exhausted. An optional in-line HEPA filter is available. The removed waste material is initially conveyed to a 16 cu. ft. waste storage chamber, from which it can be transferred through a sealed system to appropriate waste disposal containers. The LTC Needle-Gun is a hand-held needle scaler that operates within an evacuated enclosure called a shroud, which prevents the release of dust, debris, and airborne contaminants into the environment. The delivery system for the scaler consists of thin metal needles which rotates 360 degrees with a back and forth motion to scabble the desired surface media. The LTC Roto Peen scaler is a hand-held unit that operates within an evacuated enclosure called a shroud, which prevents the release of dust, debris, and airborne contaminants into the environment. The delivery system for the scaler consists of heavy-duty pistons that move in a back and forth motion to chip away at the desired surface media. The LTC Shrouded scaler hammer is a hand-held unit that operates within an evacuated enclosure called a shroud, which prevents the release of dust, debris, and airborne contaminants into the environment. The delivery system for the scaler consists of heavy-duty pistons that move in a back and forth motion to chip away at the desired surface media. Dimensions of Tech Model (LxWxH): ú LTC PTC-6: 26" X 44.5" X 71.5" ú Roto-peen scaler: 14" X 6.25" X 6" ú Shrouded Scaler Hammer: 19.1" X 6" X 7" ú Needle Gun: 13" long and 1.75" diameter Weight of Tech Model (lb.): ú LTC PTC-6: 540 lb. ú Roto-peen scaler: 7.5 lb ú Shrouded Scaler Hammer: 11.4 lb ú Needle Gun: 8.2 lb

Benefits

The LTC Power Tool Center can achieve a significantly higher total production rate than competing technologies if used to its full potential (i.e. if all six desurfacing tools are simultaneously employed for a given job). Basically dust-free operation. Easy to operate and required little training.

Limitations

Can not be used on wet surfaces. Not field verified.

Comments

Pictures

Videos

 
  
Back to Top
More Modules

Download Original    Management of D&D of Oak Ridge Building 3505 | After

Pre cache